Reactor Parameter List
DeviceCore

Visca PTZ

core-protocol-visca - Version v1.0.5-pre3 · 91 parameters · 1 models Press / to search · View table layout
All Models ▼
▶ Auto Tracking (22)
▶ Black Board (7)
▶
Auto Tracking Blackboard Mode CAM_AT_BLACK_BOARD_MODE Enable to set specific areas where tracking will be disabled when person enter the area. After leave the area camera will start tracking again.
OptionList
Control & Feedback
Control: Options
0: Disable
1: Enable
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
0: Disable
1: Enable
▶
Call Auto Tracking Black Board Position 0 CAM_AT_CALL_BLACK_BOARD_0 Call the preset that is saved as the area where tracking is disabled.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Call Auto Tracking Black Board Position 1 CAM_AT_CALL_BLACK_BOARD_1 Call the preset that is saved as the area where tracking is disabled.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Clear Auto Tracking Black Board Position 0 CAM_AT_CLEAR_BLACK_BOARD_0 Delete the preset that is saved as the area where tracking is disabled.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Clear Auto Tracking Black Board Position 1 CAM_AT_CLEAR_BLACK_BOARD_1 Delete the preset that is saved as the area where tracking is disabled.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Set Auto Tracking Black Board Position 0 CAM_AT_SET_BLACK_BOARD_0 Set the preset of the area where tracking will be disabled
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Set Auto Tracking Black Board Position 1 CAM_AT_SET_BLACK_BOARD_1 Set the preset of the area where tracking will be disabled
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶ Limit (10)
▶
Call Auto Tracking initial position CAM_AT_CALL_INITIAL_POSITION Call the initial position preset to see what the position was.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Call Auto Tracking left up position CAM_AT_CALL_LEFTUP_LIMIT Call the left up position to see what the position was.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Call Auto Tracking right down position CAM_AT_CALL_RIGHTDOWN_LIMIT Call the right down position to see what the position was.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Clear Auto Tracking initial position CAM_AT_CLEAR_INITIAL_POSITION Clear Auto Tracking initial position.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Clear Auto Tracking Left Up Limit CAM_AT_CLEAR_LEFTUP_LIMIT Clear the left up position limit.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Clear Auto Tracking Right Down Limit CAM_AT_CLEAR_RIGHTDOWN_LIMIT Clear the right down position limit.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Enable Auto Tracking Area CAM_AT_LIMIT_ENABLE Enable the tracking area set with the Left up and right down position. Everything in between will be seen as tracking area.
OptionList
Control & Feedback
Control: Options
0: Disable
1: Enable
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
0: Disable
1: Enable
▶
Set Auto Tracking Initial Position CAM_AT_SET_INITIAL_POSITION Set the start position of the camera so it can detect a person to start tracking. This is also seen as an overview position.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Set Auto Tracking Left up Position CAM_AT_SET_LEFTUP_LIMIT This position will set the max. left Hight corner that the camera will move to for finding a person.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Set Auto Tracking Right Down Position CAM_AT_SET_RIGHTDOWN_LIMIT This position will set the max. right down corner that the camera will move to for finding a person.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Auto Tracking Time Lost CAM_AT_CHANGE_TIME Set the time that the camera will return to initial position after person is no longer in the tracking area
OptionList
Control & Feedback
Control: Options
5: 0.5 s
10: 1 s
15: 1.5 s
20: 2 s
25: 2.5 s
30: 3 s
35: 3.5 s
40: 4 s
45: 4.5 s
50: 5 s
55: 5.5 s
60: 6 s
65: 6.5 s
70: 7 s
75: 7.5 s
80: 8 s
85: 3.5 s
90: 9 s
95: 9.5 s
100: 10 s
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 20 opts
Options by Model
▶ Telycam Vision+ (20 options)
5: 0.5 s
10: 1 s
15: 1.5 s
20: 2 s
25: 2.5 s
30: 3 s
35: 3.5 s
40: 4 s
45: 4.5 s
50: 5 s
55: 5.5 s
60: 6 s
65: 6.5 s
70: 7 s
75: 7.5 s
80: 8 s
85: 3.5 s
90: 9 s
95: 9.5 s
100: 10 s
▶
Auto Tracking Enable CAM_AT_ENABLE Start/stop Auto Tracking function
OptionList
Control & Feedback
Control: Options
0: Disable
1: Enable
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
0: Disable
1: Enable
▶
Auto Tracking Target Location CAM_AT_TARGET_LOCATION Choose if you want the person being tracked to be aligned on the left, right or center of the camera.
OptionList
Control & Feedback
Control: Options
0: Center
1: Left
2: Right
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 3 opts
Options by Model
▶ Telycam Vision+ (3 options)
0: Center
1: Left
2: Right
▶
Auto Tracking Target Ratio CAM_AT_TARGET_RATIO Determine how zoomed in you want the camera to be on the person being tracked. 1/6 is totally zoomed in and 1/20 is totally zoomed out.
OptionList
Control & Feedback
Control: Options
1: Whole Body
6: 1/6
8: 1/8
10: 1/10
12: 1/12
16: 1/16
20: 1/20
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 7 opts
Options by Model
▶ Telycam Vision+ (7 options)
1: Whole Body
6: 1/6
8: 1/8
10: 1/10
12: 1/12
16: 1/16
20: 1/20
▶
Auto Tracking Lock Scaling Ratio CAM_AT_ZOOM_LOCK Enable this function so that the camera will not zoom in and out during tracking.
OptionList
Control & Feedback
Control: Options
0: Disable
1: Enable
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
0: Disable
1: Enable
▶ config (6)
▶
Connected connection Connection status of device
On/Off
Control & Feedback
Control: None
Feedback: Binary (On/Off)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal On/Off
▶
Custom Command custom_command Type here row visca command for perform it. It should has format as an example: 8x 0A 01 46 01 00 FF
Trigger Experimental
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Meta Values
Command (String) Command format exmaple: 8x 0A 01 46 01 00 FF
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Device Test device_test Test-function to identify your device, it will control the PTZ controls before attempting to return to home.
Trigger Helper
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
IP Address ip_address IP address of connected camera
String Helper
Control & Feedback
Control: None
Feedback: String
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal String
▶
Reset Sequence Number reset_sequence Resets the sequence number (only valid if controller is connected to camera over VISCAoverIP
Trigger Helper
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Response Delay (Milliseconds) response_delay Smoothened response delay for current connection
Float Helper
Control & Feedback
Control: None
Feedback: Float [0:120000]
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal [0.00:120000.00]
▶ Exposure (5)
▶
Exposure Mode CAM_AE Change the exposure mode.
OptionList Simple
Control & Feedback
Control: Options
0: Smooth Auto
3: Manual
10: Shutter Priority
11: Iris Priority
13: Bright
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 5 opts
Options by Model
▶ Telycam Vision+ (5 options)
0: Smooth Auto
3: Manual
10: Shutter Priority
11: Iris Priority
13: Bright
▶
Bright CAM_BRIGHT Control the brightness value.
Integer
Control & Feedback
Control: Integer [0:27] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:27]
▶
Gain CAM_GAIN Control the gain value.
OptionList
Control & Feedback
Control: Options
0: 0 dB
1: 2 dB
2: 4 dB
3: 6 dB
4: 8 dB
5: 10 dB
6: 12 dB
7: 14 dB
8: 16 dB
9: 18 dB
10: 20 dB
11: 22 dB
12: 24 dB
13: 26 dB
14: 28 dB
15: 30 dB
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 16 opts
Options by Model
▶ Telycam Vision+ (16 options)
0: 0 dB
1: 2 dB
2: 4 dB
3: 6 dB
4: 8 dB
5: 10 dB
6: 12 dB
7: 14 dB
8: 16 dB
9: 18 dB
10: 20 dB
11: 22 dB
12: 24 dB
13: 26 dB
14: 28 dB
15: 30 dB
▶
Iris CAM_IRIS Control the iris value.
OptionList Simple
Control & Feedback
Control: Options
0: Close
1: F14
2: F11
3: F9.6
4: F8.0
5: F6.8
6: F5.6
7: F4.8
8: F4.0
9: F3.4
10: F2.8
11: F2.4
12: F2.0
13: F1.8
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 14 opts
Options by Model
▶ Telycam Vision+ (14 options)
0: Close
1: F14
2: F11
3: F9.6
4: F8.0
5: F6.8
6: F5.6
7: F4.8
8: F4.0
9: F3.4
10: F2.8
11: F2.4
12: F2.0
13: F1.8
▶
Shutter CAM_SHUTTER Control the shutter speed.
OptionList
Control & Feedback
Control: Options
5: 1/30
6: 1/60
7: 1/90
8: 1/100
9: 1/125
10: 1/180
11: 1/250
12: 1/350
13: 1/500
14: 1/725
15: 1/1000
16: 1/1500
17: 1/2000
18: 1/3000
19: 1/4000
20: 1/6000
21: 1/10000
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 17 opts
Options by Model
▶ Telycam Vision+ (17 options)
5: 1/30
6: 1/60
7: 1/90
8: 1/100
9: 1/125
10: 1/180
11: 1/250
12: 1/350
13: 1/500
14: 1/725
15: 1/1000
16: 1/1500
17: 1/2000
18: 1/3000
19: 1/4000
20: 1/6000
21: 1/10000
▶ Focus (7)
▶
Focus Mode CAM_FOCUSMODE Change the focus mode (auto/manual).
OptionList Simple
Control & Feedback
Control: Options
2: Auto
3: Manual
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
2: Auto
3: Manual
▶
Focus Position CAM_FOCUS_DIRECT Control the absolute focus position.
Integer
Control & Feedback
Control: Integer [0:28448] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:28448]
▶
Focus OnePush Trigger CAM_FOCUS_ONEPUSH Triggers a one-push autofocus operation.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Focus Speed CAM_FOCUS_SPEED Control the focus speed
Integer
Control & Feedback
Control: Integer [-7:7] (dynamic)
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal None [-7:7]
▶
Focus Stop CAM_FOCUS_STOP Stops the focus operation.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Focus Incremental focusIncremental Focus Incremental for camera (Far/Near) This param is perfect for adding focus control to an encoder or focus wheel
Incremental Simple
Control & Feedback
Control: Incremental
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Incremental None -
▶
Focus Max Speed focusMaxSpeed Max focus speed for camera. This param controlles the max speed of the incremental and speed control for focus (Gets applied as a scale 1=1%, 100=100%, or as a speed 1=slowest, Max=fastest)
Integer Simple
Control & Feedback
Control: Integer [1:7]
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal None [1:7]
▶ Image (8)
▶
Sharpness CAM_APERTUREGAIN Control the image sharpness.
Integer
Control & Feedback
Control: Integer [0:15] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:15]
▶
Backlight Compensation CAM_BACKLIGHT Enables or disables backlight compensation.
OptionList
Control & Feedback
Control: Options
2: On
3: Off
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
2: On
3: Off
▶
Brightness CAM_BRIGHTNESS Control the image brightness.
Integer
Control & Feedback
Control: Integer [0:15] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:15]
▶
Contrast CAM_CONTRAST Control the image contrast.
Integer
Control & Feedback
Control: Integer [0:15] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:15]
▶
Gamma CAM_GAMMA Control the gamma value.
Integer
Control & Feedback
Control: Integer [0:15] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:15]
▶
Saturation CAM_LUMINANCE Control the image saturation.
Integer
Control & Feedback
Control: Integer [0:15] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:15]
▶
NoiseReduction 2D CAM_NR_2D Enables or disables 2D noise reduction.
OptionList
Control & Feedback
Control: Options
0: Off
1: On
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
0: Off
1: On
▶
NoiseReduction 3D CAM_NR_3D Change the 3D noise reduction mode.
OptionList
Control & Feedback
Control: Options
0: Off
1: Auto
2: 1
3: 2
4: 3
5: 4
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 6 opts
Options by Model
▶ Telycam Vision+ (6 options)
0: Off
1: Auto
2: 1
3: 2
4: 3
5: 4
▶ Presets (20)
▶ Trace (DC) (17)
▶
Current Trace dcTraceCurrent Displays the identifier of the currently selected or active trace. It helps users to identify which trace is being operated on.
Integer
Control & Feedback
Control: None
Feedback: Integer [0:100]
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal [0:100]
▶
Trace Delete dcTraceDelete Deletes a selected trace, freeing up space and removing it from the list of available traces for playback.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Trace Elapsed Time dcTraceElapsedTime Displays the elapsed time since the start of the current trace operation, providing insight into the operation's duration.
String
Control & Feedback
Control: None
Feedback: String
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal String
▶
Trace End dcTraceEndOfTrace The parameter returns 'true' when the end of the trace playback is reached. It reverts to 'false' when the loop restarts, or after one second in case of no looping.
On/Off
Control & Feedback
Control: None
Feedback: Binary (On/Off)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal On/Off
▶
Trace Exists dcTraceExists Checks if a specific trace exists within the current device configuration. It returns a binary result indicating the presence of the trace.
On/Off
Control & Feedback
Control: None
Feedback: Binary (On/Off)
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal On/Off
▶
Trace Loop dcTraceLoop Enables looping where the trace is continuously played back
On/Off
Control & Feedback
Control: Binary (On/Off)
Feedback: Normal (Same as Control)
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal On/Off
▶
Trace Loop Delay dcTraceLoopDelay For looping, it defines the number of seconds to wait after a trace playback before it's armed again and before starting playback again. If ping-pong is enabled, it also defines the waiting time before playing back the trace in reverse.
Integer
Control & Feedback
Control: Integer [0:120]
Feedback: Normal (Same as Control)
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:120]
▶
Trace Ping Pong dcTracePingPong Enables ping-pong where the trace is played back in reverse after reaching its end.
On/Off
Control & Feedback
Control: Binary (On/Off)
Feedback: Normal (Same as Control)
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal On/Off
▶
Trace Playback dcTracePlay Triggers the playback of a predefined trace. Traces are sequences of speed commands for pan, tilt and zoom stored for later playback. If the current state is stopped, triggering this parameter will arm the trace, and if the state is armed, it will start playback.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Trace Record dcTraceRecord Starts the recording of a new trace when the current state is either stopped or empty. It allows for capturing a sequence of pan, tilt and zoom operations for later playback.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Trace Remaining Time dcTraceRemainingTime Indicates the remaining time for the current trace operation (either recording or playback). It's useful for understanding how much longer an operation will last.
String
Control & Feedback
Control: None
Feedback: String
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal String
▶
Trace Status dcTraceStatus Returns the current status of a specific trace. It indicates whether the trace is empty, stopped, armed, playing, or recording. This is useful for monitoring and managing trace lifecycle.
OptionList
Control & Feedback
Control: None
Feedback: Options
0: Empty
1: Stopped
2: Armed
3: Playing
4: Recording
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal 5 opts
Options by Model
▶ Telycam Vision+ (5 options)
0: Empty
1: Stopped
2: Armed
3: Playing
4: Recording
▶
Trace Status Label dcTraceStatusLabel Provides a human-readable representation of the current trace status. It is beneficial for user interfaces that display the trace status.
String
Control & Feedback
Control: None
Feedback: String
Dimensions
Trace (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal String
▶
Trace Step dcTraceStep Shows the current step in a multi-step trace operation, providing a count in the form of 'x/y', where 'x' is the current step, and 'y' is the total number of steps
String
Control & Feedback
Control: None
Feedback: String
Model Support
Model Control Feedback Range/Type
Telycam Vision+ None Normal String
▶
Trace Stop dcTraceStop Halts any ongoing trace operation, whether it's recording or playback.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Trace Test dcTraceTest Sets test mode for Trace 1. In this mode, a predefined trace is played for Trace 1, which can be helpful for testing the camera's tracing capability. Before enabling this function, make sure to store a preset in preset bank 1. It is recommended that the preset represents the home position, but with a zoom level set to approximately the middle of the range.
OptionList
Control & Feedback
Control: Options
0: Normal
1: Basic PTZ
2: Quicker, Concurrent PT+Z
3: Pan/Tilt Only
4: Zoom Only
5: Ramped PT
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 6 opts
Options by Model
▶ Telycam Vision+ (6 options)
0: Normal
1: Basic PTZ
2: Quicker, Concurrent PT+Z
3: Pan/Tilt Only
4: Zoom Only
5: Ramped PT
▶
Trace Wait dcTraceWait When a trace is recording, this trigger will incorporate a wait step. If a trace is in playback mode, it will prompt the continuation of playback each time a user wait is detected. The function will return 'true' if a user wait is presently on hold, awaiting further action to proceed.
On/Off Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: Binary (On/Off)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot Normal On/Off
▶
Recall Preset preset_recall Recall the preset if any is saved, Preset NR 1 is Preset NR 0 on the Camera
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Dimensions
Preset (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Reset Preset preset_reset Reset a preset, Preset NR 1 is Preset NR 0 on the Camera
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Dimensions
Preset (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Store Preset preset_store Save a preset, Preset NR 1 is Preset NR 0 on the Camera
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Dimensions
Preset (127 elements)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶ PTZ (5)
▶ Speed (3)
▶
Pan Speed panspeed Pan speed for camera
Integer
Control & Feedback
Control: Integer [-24:24]
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal None [-24:24]
▶
Tilt Speed tiltspeed Tilt speed for camera
Integer
Control & Feedback
Control: Integer [-24:24]
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal None [-24:24]
▶
Zoom Speed zoomspeed Zoom speed for camera
Integer
Control & Feedback
Control: Integer [-7:7]
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal None [-7:7]
▶
Cruise Control dcCruiseControl When cruise control is enabled, any changes made to the pan, tilt, and zoom values are buffered and not immediately sent to the camera. These changes are only forwarded to the camera once cruise control is disabled. This ensures that the camera continues moving at its current speed on all axes until the cruise control option is deselected by the user.
On/Off
Control & Feedback
Control: Binary (On/Off)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal On/Off
▶
Home preset_home Move the camera to the home-position
Trigger Simple
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶ System (4)
▶
DC Tally CAM_DC_TALLY Control the tally light state. (Universal parameter)
On/Off
Control & Feedback
Control: Binary (On/Off)
Feedback: None
Dimensions
Tally (0 elements)
1: Green
2: Red
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal None On/Off
▶
Freeze CAM_FREEZE Freezes or unfreezes the video output.
OptionList
Control & Feedback
Control: Options
2: On
3: Off
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
2: On
3: Off
▶
Power CAM_POWER Change Power on/off the camera
OptionList
Control & Feedback
Control: Options
2: On
3: Off
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
2: On
3: Off
▶
Tally CAM_TALLY Control the tally light state.
OptionList
Control & Feedback
Control: Options
0: Off
1: Green
2: Red
4: Blue
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 4 opts
Options by Model
▶ Telycam Vision+ (4 options)
0: Off
1: Green
2: Red
4: Blue
▶ Video (4)
▶
Digital Zoom CAM_DZOOM Change digital zoom.
OptionList
Control & Feedback
Control: Options
2: On
3: Off
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
2: On
3: Off
▶
Digital Zoom Mode CAM_DZOOM_MODE Change the digital zoom mode.
OptionList
Control & Feedback
Control: Options
0: Combined
1: Seperate
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
0: Combined
1: Seperate
▶
Flip CAM_IMGFLIP Enables or disables image flip.
OptionList
Control & Feedback
Control: Options
2: On
3: Off
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
2: On
3: Off
▶
Mirror Image CAM_LRREVERSE Enables or disables mirror image.
OptionList
Control & Feedback
Control: Options
2: On
3: Off
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 2 opts
Options by Model
▶ Telycam Vision+ (2 options)
2: On
3: Off
▶ White Balance (5)
▶
Blue Gain CAM_BGAIN Lets you set the Blue Gain.
Integer
Control & Feedback
Control: Integer [0:255] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:255]
▶
Color Temperature CAM_COLORTEMP Control the color temperature in Kelvin.
Integer
Control & Feedback
Control: Integer [1800:10000]K (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [1800:10000]
▶
Red Gain CAM_RGAIN Lets you set the Red Gain.
Integer
Control & Feedback
Control: Integer [0:255] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:255]
▶
White Balance Mode CAM_WBMODE Change the white balance mode.
OptionList
Control & Feedback
Control: Options
0: Auto
1: Indoor
2: Outdoor
3: OnePush
4: AutoTrackWB
5: Manual
6: Temperature
(has dynamic options)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal 7 opts
Options by Model
▶ Telycam Vision+ (7 options)
0: Auto
1: Indoor
2: Outdoor
3: OnePush
4: AutoTrackWB
5: Manual
6: Temperature
▶
White Balance OnePush CAM_WBONEPUSH Triggers a one-push white balance operation.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶ Zoom (5)
▶
Absolute Zoom Position CAM_ZOOM_DIRECT Control the absolute zoom position
Integer
Control & Feedback
Control: Integer [0:16384] (dynamic)
Feedback: Normal (Same as Control)
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal Normal [0:16384]
▶
Zoom Speed CAM_ZOOM_SPEED Control the zoom speed
Integer
Control & Feedback
Control: Integer [-7:7] (dynamic)
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Normal None [-7:7]
▶
Zoom Stop CAM_ZOOM_STOP Stops the zoom operation.
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Zoom Tele Step CAM_ZOOM_TELE_STEP Control Tele Step (Zooms in)
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -
▶
Zoom Wide Step CAM_ZOOM_WIDE_STEP Control Wide Step (Zooms out)
Trigger
Control & Feedback
Control: One-Shot Trigger
Feedback: None
Model Support
Model Control Feedback Range/Type
Telycam Vision+ Oneshot None -